Series data loggers allow you to mix and match isolated industrial amplifiers that install right in the chassis. Measure voltage, current, 4-20 mA process current, temperature, pressure, load, torque flow and any other industrial signal in any combination. Our data loggers are our most economical multi-channel data logger, designed to measure pre-amplified inputs that don't require isolation or signal conditioning.
- Analog Input Channels
- Voltage measurement range is from 30μV to 30mV or from
- 10mV to 10V (positive and negative) or according to the customer order
- Current measurement range is from 30μA to 30mA or from 10mA to 10 A (positive and negative) or according to the customer order.
- Available thermocouples (J, K, T, E, R, S, B & C) can be attached.
- Number of channels can be 12, 24 or 48.
- Measurement precision class is % 0.1.
- 64 MB Flash Memory
- Sampling rate for each analog channel is 3.5 KHz (every 256 μs)
- Two different simultaneous types of data storing
Average of samples taken with period of 1 ms is calculated every 8 ms, and average of samples taken over periods from 8 ms to 24 hr can be stored in Flash Memory. Considering the capacity of memory, if data storage rate is chosen equal to once every one second, then the Flash Memory is able to store data for 10 days without overwriting the previously stored data. Choosing storage period equal to one second, there are 125 samples (every 8 ms, one sample) that their average will be stored as the data representing that one second. It is noteworthy that the ability of storing maximum and minimum sample values among the 125 samples is provided in order to analyze the stored data in a more exact way, therefore if the measured quantity has sudden changes for even 8 ms, the minimum and maximum of each interval are stored separately in order to refrain from losing it during averaging process.
The data sampled with period of 1ms can be stored in Flash Memory for time length up to 200s. If the time length of 200s is reduced, proportionally the number of storing will increase, for example if the time length is chosen equal to 1s then number of storing will be 200 times.
- Switching mode power supply from 120V to 260V or according to the customer order- Connects to PC via RS485, RS232 (Mode
Bus), sends data to remote places using all kind of communication links (Telephone, wireless links) - Touch screen LCD 12.1"
- Dimension: Can be installed in standard industrial racks 19" or 96×96 mm
- Graphical software for displaying information with following features:
- Trend
- Alarm list , Event list
- Bar and Digital graphs and gauge charts
- Graphical process presentation, which displays information near system parts
- Real time information displaying
- Defining different alarm levels (Lo, LoLo, Hi, HiHi)
- Ability to use GPS to synchronize date and hour of data logger devices with accuracy of 1ms
- Saves stored data to other file formats like Excel
